This technology gives sharp images with greater detail and lower exposure times than would be attainable with AC X-ray units, which are characterised by variable emissions.
Moreover, constant-potential design ensures image generation is unaffected by power fluctuations.
RXDC - eXTend technology is reliable for all diagnostic needs and always provides high-definition images by adapting to the sensor type.
The focal spot of just 0.4 mm is placed in the tube head in such a way as to obtain a source-to-skin gap of 30 cm (total bulk remaining equal).
In this way RXDC - eXTend technology implements extensive internal collimation of the X-rays and gives an extremely small focal spot, producing ever-sharper images and ever-more precise detail.
Automatic parameter modulation ensures the best exposure power/time selection: parameters are automatically determined on the basis of the patient’s build and the specific region of investigation. With 28 selectable sensitivity levels, sharp images are guaranteed with any sensor.
Attention to patient health is meticulous: a high frequency, constant potential generator minimises exposure times and reduces harmful radiation. Where deemed appropriate, the 4 mA mode halves the amount of X-rays. The interchangeable rectangular collimator cone (at 30 cm) further reduces the rradiated body surface area by adapting it to the effective surface area of the sensor.
No downtimes as a result of tube overheating, not even when repeated use is required.The fast dynamic duty cycle allows, in fact, sequential exposures by keeping tube temperature under constant control on the large hand-held unit display.
The wireless controller frees users from the limits posed by on-machine control panels or wall-mounted controls. It is equipped with a button for ultra-fast shooting (fraction of a second) and two simple settings which make it easy to select the most suitable X-ray acquisition programme.
They are available in lengths of 40 cm, 60 cm and 90 cm and can be pointed in 6 directions to provide maximum adaptability and simplicity of installation.
| TECHNICAL DATA | ||
| Generator | Constant potential, microprocessor-controlled | |
| Working frequency | 145 - 230 KHz with self-adjustment (typically 175 KHz) | |
| Focal spot | 0.4 mm (IEC 336) | |
| Total filtration | 2.0 mm Al @ 70 kV | |
| Anode current | 4 / 8 mA | |
| Voltage at X-ray tube | 60 / 65 / 70 kV (*) | |
| Exposure times | 0.020 – 1.000 seconds, R’10 and R’20 scale | |
| Source-skin distance | 20 and 30 cm | |
| Irradiated field | Ø 55 mm and Ø 60 mm round | |
| Additional collimators | 35 x 45 mm rectangular, 31 x 41 mm and 22 x 35 mm, for sensors size 2 and size 1 | |
| Power Supply | 50/60 Hz, 115-120 V AC ±10% or 230-240 V AC ±10% | |
| Duty Cycle | Continuous operation with self-adjustment up to 1s/80s total | |
| Arms (for Standar version only) | Available in 3 lengths: 40 cm – 60 cm – 90 cm | |
| Max. arm extension | 230 cm, from wall | |
| Certification | CE 0051, FDA approved | |
| Versions | Standard (wall mounted) or Mobile (on portable cart) | |
(*) values depend on the country where the product is marketed.
